Diamond Products
Diamond Drills are one of the most important drilling materials used in core drills, a good drill can be obtained thanks to a quality drill. Diamond drills are embedded in a matrix of synthetic diamond beads. The matrix is designed according to the wear rate and duration of the diamond, so as the metric wears, new and sharp diamond surfaces appear. The drilled drill has two separate layers of the diamond, while the diamond matrix cuts the rock, while the reinforcing layer binds the matrix layer to the steel carrier and also carries the anti-wear material of the inner and outer diameter. There is no synthetic diamond in the reinforcement section, but it is a metal matrix produced by powder metallurgy. Tungsten carbide abrasion preventive elements are placed on the inner and tooth sides to prevent wear. In diamond drills produced using the infiltration technique, compressed metal powders are combined with the diamond beads filling the gaps with the solder material melting at low temperature. Depending on the importance of the drilling and the desired result, top quality synthetic diamonds are used in such studies. Variable rocks with diamond grained drills are generally preferred because of their high drilling speed, long life and very wear-resistant in hard drilling.
Different diamond drills are used depending on the surface to be drilled and the condition of the rocks below.
In very soft formations; clay stone, gypsum, chalk, etc. in environments (10-15) S.P.C
In soft formations; S.P.C in sedimentary and meta formic rocks (15-25)
In medium hard formations; marble, serpentine limestone etc. (25-40) S.P.C
In hard formations; limestone, schist, sandstone, andesite etc. (40-60) S.P.C
In very hard formations; granite, basalt, dacite, etc. (60-80) S.P.C
In extremely hard formations; quartz, quartzite, chert (80-100) S.P.C
In very hard and cracked formations; impregnation (> 100) S.P.C diamond is used S.P.C (stone in 1 carat) amount. The impregnated diamond mentioned above is a type of diamond drill that must be operated with very high pressure and speed. Depending on the feature of the formations, it is possible to use impregnated diamond bits of any diameter with any type of core barrel.
Vidya
For detailed information, you can visit https://furkansondajekipmanlari.com/en/sondaj-ekipmanlari/vidyeler/ page.
It is a black substance made of cemented carbide or Tungsten carbide. Due to the plastering of diamond stones in some drillings, especially when used in clayey rocks, both rapid progress and core removal efficiency increase. Vidye products are preferred because they are more economical than diamond tips. The vidya ends are used by grinding and do not disassemble, they are very sensitive to bumps.
Vidye products should be operated by applying very low speed and pressure. You can get information about all drilling equipment and high-tech diamond drill bits and vidye products at any time on our website http://furkansondajekipmanlari.com/en or on our phone number +90 545 359 06 94, our expert staff will inform you about all kinds of drilling equipment.
